How Do I Making Wood Countertops

Making Wood Countertops Amazing View in gallery

Making wood countertops can increase the value of all the fixtures. They can be built with some joinery knowledge and skill. They are cheaper than granite or marble. They should be built from hardwoods, maple is often used. The wooded worktop must be sealed to avoid stain and spill damage, but can be colored in the same color as the cabinet or left naturally depending on your style.

Instruction

Measure the size of the for making wood countertops. Build one inch larger at each exposed end. This allows it to hang over the cabinet. Seemed cut to the right length by means of a hack saw. You need enough wood pieces to glue up to the width. If you have to cut a piece and width, use a table saw. Place wooden pieces on a flat surface. Match patterns in the grain as much as you can. Try to avoid obvious stitches in wood. Select boards in a numbered format so that you know how to mow the boards.

READ  How to Care About Lightweight Countertop

Place boards in the clips. Apply a small amount of wood to the edge of the boards. Tighten the clips while ensuring that the discs are lined up. Allow the glue to dry for 30 minutes before removing the clips. Sand in the edges of the countertop using a slab and 180 sandpaper. Sand any pebbles or scratches in the wood. Color for making wood countertops with oil base stain of your choice. Allow the stain to dry for 8 hours before applying two layers of a clear sealant with a brush.

READ  Blue Stone Countertop That Easy to Maintain